Remove

1. Drain and remove oil pan, then filter and gasket.




2. Disconnect electrical connectors at valve body, per figure.




3. Remove bolts from valve body assembly, manual detent spring and roller assembly, per figure. Ensure five O-rings are attached to pressure manifold assembly.

4. Remove pressure manifold assembly.

5. Remove wiring clips, fluid level indicator' stop, lube pipe, lube pipe retainer and clamps.

6. Remove control valve assembly including accumulator housing assembly, valve body gaskets, spacer plate and accumulator gasket.

7. Remove eight check balls from case


8. passages.

Remove two speed sensors, bracket assemblies and PWM solenoid screen.