Assemble

1. Install bearing and first speed gear.

2. Install mainshaft synchronizer reverse gear.

3. Install retaining ring, sleeve, spacer, bearing and retaining pin.

4. Install reverse gear, thrust washer, bearing, overdrive gear and rotor, if equipped.

5. Install synchronizer ring, retaining ring, synchronizer rings, synchronizer assembly, retaining ring, synchronizer rings, retaining ring, bearing, second speed gear, retaining pin, thrust washer, retaining ring, spacer, bearing, clutch gear and synchronizer ring.

6. Install third speed gear and synchronizer assembly.

7. Install synchronizer ring and clutch gear.