Shift Fork Replacement

Remove or Disconnect

1. Axle shaft (output shaft) and tube assembly.
2. Shift shaft (18), damper spring (17), fork (16), and clip (15) assembly.
3. Spring (14) from the carrier case, taking care not to dislodge the shim (20) from the axle shaft (output shaft).

Install or connect

1. Spring (14) into the carrier case.
2. Shift shaft (18), damper spring (17), fork (16), and clip (15) assembly into axle tube.
- Make sure the clip is fully seated into the groove on the shift lever.
3. Axle shaft (output shaft) and tube assembly.