Actuator Shift Fork Replacement

Fig. 1 Exploded View Of Front Axle:

SHIFT FORK REMOVAL
1. Remove axle shaft and tube assembly.
2. Remove shift lever(18), damper spring(17), fork(16) and clip(15).
3. Remove spring(14) from carrier case. Ensure shim does not dislodge from output shaft.

SHIFT FORK INSTALLATION
1. Ensure clip if fully seated into groove on shift lever and install spring(14) into carrier case.
2. Install shift lever(18), damper spring(17), fork(16) and clip(15).
3. Install axle shaft and tube assembly.