Front Side Door Window Regulator Motor Assembly

CAUTION: if electric motor removal from the regulator assembly is required, the sector gear must be locked into position. The regulator lift arm is under tension from the counterbalance spring and could cause personal injury if the sector gear is not locked in position.

Locking Sector Gear:

REMOVE OR DISCONNECT
1. Front side door window regulator assembly with motor assembly.
2. Drill hole through window regulator sector gear and backplate.
3. Install bolt and nut to lock sector gear into position.
4. Rivets.
^ Push rivet mandrel out of rivet with a punch.
^ Drill out rivet.
^ Remove rivet fragments from hole.
5. Motor assembly (83).

INSTALL OR CONNECT
1. Motor assembly (83).
2. Rivets.
3. Remove bolt and nut used to secure sector gear.
4. Front side door window regulator assembly and motor.