Clearing Diagnostic Trouble Codes

Clear CCM DTCs

(Diagnostic Mode 1.7)

After all diagnosis and repairs are completed, clear the CCM DTCs as follows (if already in CCM diagnostic mode, begin at Step 3):

1. With ignition "OFF," ground terminal "12" of DLC connector.

2. Turn ignition "ON."

3. Press "TRIP/ODO" button on DIC until "1.7" appears in the trip monitor area of the instrument cluster.

4. Press "ENG/MET" button on DIC and hold until "---" appears in speedometer area of cluster; this will clear CCM DTCs.

5. Turn ignition "OFF."

6. Turn ignition "ON" and verify that no CCM DTCs are present.

7. Turn ignition "OFF," then remove DLC ground to terminal "12".