Front Alignment Specifications
LESS HEAVY DUTY SUSPENSIONCaster Angle, Degrees
Limits +.2 to +2.2
Desired +1.2
Camber Angle, Degrees
Limits - .7 to +.7
Desired 0
Total Toe, Degrees [01]
Limits -.2 to +.2
Desired 0
Ball Joint Wear [04]
[01] Toe-In (+). Toe-Out (-).
[04] Ball joints must be replaced if any looseness is detected in joint or if seal is cut.
HEAVY DUTY SUSPENSION
Caster Angle, Degrees
Limits +.2 to +2.2
Desired 1.2
Camber Angle, Degrees
Limits - .85 to +.55
Desired -0.15
Total Toe, Degrees [01]
Limits -.2 to +.2
Desired 0
Ball Joint Wear [04]
[01] Toe-In (+). Toe-Out (-).
[04] Ball joints must be replaced if any looseness is detected in joint or if seal is cut.