Troubleshooting Hints

Perform before beginning System Diagnosis
1. Check Fuse 5 by visual inspection.
2. Check Back Up Lights for damage to filament or corrosion between bulb and socket.
^ Refer to Automatic Transmission/Transaxle for Park/Neutral Position Switch access.
^ Refer to Automatic Transmission/Transaxle for Back Up Light Switch access.
^ Refer to System Diagnosis. Flow of Diagnosis
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (Refer to "Diagnostic Aids/General Troubleshooting Procedures,") Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (Refer to "Diagnostic Aids/General Troubleshooting Procedures,") Diagnostic Aids