Unlocking Secured Radio After A Power Loss

When battery power is reapplied to a secured radio assembly, the radio assembly won't turn on and "LOC" appears on the display. Enter the secret customer or factory backup code as follows (do not pause more than 15 seconds between steps):

If power is disrupted to the audio system while in the "SEC" mode, the unit will not work and "LOC" will show on the display whenever the ignition is on. To unlock the unit (with the ignition in "ACC" or "RUN" position and radio off):

1. Press "MIN" and "000" will appear on the display.
2. Press "MIN" again and hold until last two digits of the code appear. Release the button.
3. Press "HR" until the first one or two digits appear.
4. Press "AM/FM" and "SEC" will appear and the unit will work. If "LOC" shows, the numbers did not match and the unit is still locked.

IMPORTANT
^ If the security code is lost or forgotten, contact the dealer for assistance.