Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Engine Flywheel Installation
IMPORTANT: If replacing the engine flywheel (manual transmission), note the position of the original flywheel weights (if applicable). Flywheel weights must be installed into the new engine flywheel (manual transmission) in the same location.
1. Note the position of the flywheel weights (manual transmission applications), install the NEW flywheel weights as required.
A properly installed flywheel weight should be installed until flush or below flush with the face of the engine flywheel.
2. Install the engine flywheel.
Align the engine flywheel locator hole to the flywheel locator pin.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the engine flywheel bolts.
Tighten the engine flywheel bolts in sequence (1 - 8) to 100 Nm (74 ft. lbs.).