Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or
click to submit anonymously
Loaded Canister Test
The control module monitors the fuel trim
oxygen sensors during normal
[1][2]EVAP purging in order to determine if the EVAP canister is storing a sufficient amount of fuel vapors. If the test indicates that the EVAP canister is storing a sufficient amount of fuel vapors the remaining diagnostic tests for the EVAP system will store a pass. If the Loaded Canister Test indicates to the control module that an insufficient amount of fuel vapors are being stored by the EVAP canister, the Weak Vacuum Tests will run.