Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Speed Sensor and Case Extension Removal
REMOVAL PROCEDURE- Tools Required
- J 29837-A Output Shaft Support Fixture
1. Remove the sensor retaining bolt.
2. Remove the speed sensor and O-ring seal.
3. Remove the case extension bolts.
4. Remove the case extension and the case seal.
5. Remove the output shaft sleeve and the output shaft O-ring seal. Not all models use an output shaft sleeve and O-ring seal.
6. Install the output shaft support fixture.
If the output shaft support fixture is not used, the output shaft may fall free when the input carrier retaining ring is removed.