Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1998 >> Cavalier L4-2.2L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair

Knock Sensor Wiring Harness Connector:




Knock Sensor:






REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Raise the vehicle. Suitably support the vehicle.
3. Remove the Knock Sensor wiring harness connector from the knock sensor.
4. Remove the knock sensor from the engine block.

INSTALLATION PROCEDURE
1. After cleaning the threads thoroughly, install the knock sensor into the engine block. Tighten the knock sensor to 16-22 Nm (12-16 lb ft).
2. Install the KS wiring harness connector to the knock sensor.
3. Lower the vehicle.
4. Connect the negative battery cable.
pro multis · About Operation CHARM