Valve Rocker Arm, Shaft, and Rush Rod Removal

1. Remove the valve rocker arm shaft assembly retaining bolts.
2. Remove the valve rocker arm shaft assemblies.

IMPORTANT: Mark the valve rocker arm assemblies, in order to return each assembly to the original location.





3. Remove the valve pushrods.

IMPORTANT: Mark the valve pushrods, in order to return each valve pushrod to it's original location and direction during installation. Each end of the valve pushrods has a different degree of hardness. The upper end of the valve pushrod is copper colored. A paint stripe also identifies the upper end of the valve pushrod.