Receiver Dryer: Service and Repair

Important
^ When installing a new receiver/dryer, 10 mL (0.3 fl. oz.) of refrigerant oil must be added to the refrigeration system.

Remove or Disconnect

1. Discharge and recover refrigerant.
2. Negative (-) battery cable.
3. A/C dual pressure switch electrical connector.
4. Receiver/dryer inlet and outlet pipes at fittings.
5. Two screws and receiver/dryer from mounting bracket.

Install or Connect

1. Receiver/dryer to mounting bracket; secure with two screws.
2. Receiver/dryer inlet and outlet pipes at fittings; secure with pipe bolt.

Tighten
^ Receiver/dryer pipe fitting bolts to 35 N.m (26 lb. ft.).

3. A/C dual pressure switch electrical connector.
4. Negative (-) battery cable.
5. Evacuate and recharge air conditioning system.
6. Operate A/C system and check for refrigerant leaks.