Keyless Entry Receiver: Service and Repair

REMOVAL PROCEDURE
1. Remove the engine cover.
2. Disconnect the electrical connector from the remote control door lock receiver (2).
3. Remove the plastic fasteners that retain the remote control door lock receiver (2) to the sound insulation.
4. Remove the control door lock receiver from the vehicle.

INSTALLATION PROCEDURE
1. Install the remote control door lock receiver to the vehicle.
2. Install the plastic fasteners that retain the remote control door lock receiver (2) to the sound insulation.
3. Connect the electrical connector to the remote control door lock receiver (2).
4. Install the engine cover.