The SET Function

Use the SET function in order to set the cruise control at a particular speed. Engage the SET function in the following manner:
1. Ensure that the vehicle speed is above the low speed point.
2. Place the OFF-ON-R/A switch in the ON position.
3. Depress and release the SET/COAST switch. Cruise speed will be within approximately 1.6 km/h (1 mph) of the actual speed when engaged.

The cruise control will operate until one of the following procedures are performed:
^ The OFF-ON-R/A switch is moved to the OFF position.
^ The SET switch is depressed and held.

Push the brake or clutch pedal in order to disengage the system.

The set speed is maintained in memory, allowing the cruise speed to be resumed at a later time.