Engine Block Data/Specifications
| Crankshaft Position Sensor Bolt | 53 Foot Pound-Force (ft.lb) | |
| Lower Crankcase Bolts | First pass | 14 Foot Pound-Force (ft.lb) |
| Second Pass | 20 Foot Pound-Force (ft.lb) | |
| Cylinder Bore | STD Blue Marking | 3.3071-3.3074 Inch (in) |
| STD Red Marking | 3.3075-3.3078 Inch (in) | |
| MAX | 3.3090 Inch (in) | |
| Allowance For Honing | 0.008 Inch (in) | |
| Out of Round MAX | 0.0039 Inch (in) | |
| Taper MAX | 0.0039 Inch (in) | |
| Gasket Surface Distortion | MAX | 0.0024 Inch (in) |
| Main Bearing Cap Bore Diameter | A Stamping | 2.4409-2.4411 Inch (in) |
| B Stamping | 2.4412-2.4414 Inch (in) | |
| C Stamping | 2.4414-2.4416 Inch (in) | |
| Cylinder Bore | Diameter(MAX) | 3.3090 Inch (in) |
| Taper(MAX) | 0.004 Inch (in) | |
| Out Of Round(MAX) | 0.004 Inch (in) |