Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 1999 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Ignition Control Module: Service and Repair





REMOVAL PROCEDURE
1. Disconnect all the electrical connectors at the ignition control module.
2. Note position of spark plug wires for installation and disconnect the spark plug wires from ignition coils.
3. Remove the screws securing coil assemblies to ignition control module.
4. Remove the ignition control module and coil assembly from the module bracket.
5. Disconnect the coils from ignition control module.





INSTALLATION PROCEDURE
1. Reinstall the coils to ignition control module.
2. Position the module/coil assembly on the module bracket

NOTE: Refer to Fastener Notice in General Information.

3. Reinstall the screws.

Tighten
Tighten the screws to 4-5 N.m (40 lb in).

4. Connect the spark plug wires as noted during removal.
5. Connect the electrical connectors to the ignition control module.
pro multis · About Operation CHARM