Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> C Tahoe 2WD V8-5.3L VIN T >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> HVAC System - Manual >> Control Assembly Replacement (Heat Only)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly Replacement (Heat Only)

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) bezel.
2. Remove the radio.
3. Remove the heater control assembly by firmly depressing and holding the retaining tabs. Slide the assembly forward.




4. Disconnect the temperature and the mode cables from the back of the control assembly.
5. Disconnect the electrical connection from the control assembly.
6. Remove the control assembly.

INSTALLATION PROCEDURE




1. Connect the electrical connection to the control assembly.
2. Connect the temperature and the mode cables to the back of the control assembly.




3. Install the control assembly to the IP carrier until you hear an audible snap.
4. Install the radio.
5. Install the IP bezel.
pro multis · About Operation CHARM