Lock Replacement - Door

REMOVAL PROCEDURE
1. Raise window.
2. Remove front side door trim panel.
3. Remove water deflector as needed.
4. Remove lock cylinder rod (5) from lock cylinder pawl clip (4).
5. Remove the lock cylinder retainer (2) using a screwdriver to slide the retainer upward.
6. Remove door lock cylinder (1) from door (3).
7. Remove lock cylinder gasket (2) from door (3).

INSTALLATION PROCEDURE
1. Install new lock cylinder gasket (2) to door (3).
2. Install door lock cylinder (1) from door (3).
3. Install the lock cylinder retainer (2) by using a screwdriver to slide the retainer downward into place.
4. Install lock cylinder rod (5) to lock cylinder pawl clip (4).
5. Install water deflector as needed.
6. Install front side door trim panel.
7. Lower window.