Steering Column Cover

Removal Procedure





1. Remove the 3 Torx(R) head screws (4) from the lower column shroud (3).
2. Remove the upper column shroud (1) by tilting up and unsnapping from the lower column shroud hinges (3).
3. Remove the lower column shroud (31 from the steering column (6).

Installation Procedure





1. Install the lower column shroud (3) to the steering column.
2. Install the upper column shroud (1) to the steering column (6).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the 3 Torx(R) head screws (4) to the lower steering column shroud (3).
- Tighten the screws to 4 Nm (36 inch lbs.).