Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Lumina V6-3.1L VIN J >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Replacement



Seat Replacement

Removal Procedure





1. Move the front seat (1 or 2) to the full rearward position.
If the vehicle is equipped with a six-way power seat, move the seat to the full rearward and up position in order to gain access to the adjuster-to-floor pan attaching bolts.
2. Remove the forward front seat anchor bolts (5).
3. Move the seat to the full-forward position.
4. Remove the rearward front seat rear anchor bolts (3).
5. Disconnect the electrical connector (4) on the six-way power seat.
6. Remove the center belt (6) on the AM6 left front seat. Refer to Seat Belt Replacement - Center Front 7.
Remove the front seat from the vehicle.



Installation Procedure





1. Position the seat in the vehicle.
2. Install the center seat belt (6) on the AM6 drivers seat. Refer to Seat Belt Replacement - Center Front
3. Connect the electrical connector (4) on the six-way power seat.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the rearward front seat anchor bolts (3).

Tighten the rearward front seat anchor bolts to 25 N.m (18 lb ft).

5. Place the seat to the full-rearward position.
6. Install the forward front seat anchor bolts (5).

Tighten the forward front seat anchor bolts to 25 N.m (18 lb ft).

7. Return the front seat to its original position.


pro multis · About Operation CHARM