| Brush Length-Standard | 17.0 Millimeter (mm) |
| Brush Length-Minimum | 11.5 Millimeter (mm) |
| Brush Spring Tension-Standard | 1.6 Kilogram-Force (kgf) |
| Brush Spring Tension-Minimum | 1.0 Kilogram-Force (kgf) |
| Commutator Insulation Depth-Standard | 0.4-0.6 Millimeter (mm) |
| Commutator Insulation Depth-Minimum | 0.2 Millimeter (mm) |
| Commutator Outside Diameter-Standard | 32.0 Millimeter (mm) |
| Commutator Outside Diameter-Minimum | 31.4 Millimeter (mm) |
| Commutator Run-Out-Standard | 0.05 Millimeter (mm) |
| Commutator Run-Out-Maximum | 0.40 Millimeter (mm) |
| Direction of Rotation | Clockwise (as viewed from pinion) |
| Number of Pinion Teeth | 8 |
| Output | 0.9 Kilowatts (kW) |
| Rating | 30 |
| Solenoid Operating Voltage | maximum 8 Volts (V) |
| Starter Motor Current Draw-No-load | maximum 60 at 11 Amperes At Volts (A @ V) |
| Starter Motor Current Draw-Load (2.7 Nm/23.9 lb.in. of torque) | maximum 150 at 9 Amperes At Volts (A @ V) |
| Starter Motor Current Draw-Locked Rotor (8.6 Nm/76.1 lb.in. of torque) | maximum 380 at 5 Amperes At Volts (A @ V) |
| Voltage | 12 Volts (V) |