Brake System Specifications

NOTE: The content of this article/image reflects the changes called out by TSB: 05-05-23-004.


Front Brakes:
Rotor Discard Thickness* 30.7 mm (1.21 in)
Minimum Rotor Thickness 31.08 mm (1.22 in)
Rotor Thickness (new) 32.2 mm (1.27 in)
Maximum Lateral Runout 0.080 mm (0.003 in)
Maximum Scoring 1.50 mm (0.059 in)
Thickness Variation 0.013 mm (0.0005 in)

Rear Brakes:
Discard Thickness* 9.0 mm (0.35 in)
Minimum Wear Thickness 10.0 mm (0.39 in)
Rotor Thickness (new) 11.0 mm (0.43 in)

*Important: All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the maximum or minimum thickness after refinish specifications.