Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2000 >> Monte Carlo V6-3.8L VIN K >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Relay/Fuse Center Replacement (Left)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Relay/Fuse Center Replacement (Left)

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Adjust the instrument panel (IP) cluster trim plate for access.
3. Disconnect the body wiring harness from the junction block.




4. Remove the junction block bolts.
5. Remove the junction block tab from the slot in the cross vehicle beam. Pull the junction block away from the IP.
6. Disconnect the body wiring harness from the junction block.
7. Remove the junction block.

INSTALLATION PROCEDURE




1. Connect the body wiring harness to the junction block.
2. Install the junction block tab to the slot in the cross vehicle beam.
3. Install the junction block bolts.

Tighten
Tighten the junction block bolts to 10 N.m (89 lb in).




4. Connect the body wiring harness to the junction block.

Tighten
Tighten the body wiring harness connector bolt to 7 N.m (62 lb in).

5. Install the instrument panel (IP) cluster trim plate.
6. Connect the negative battery cable.
pro multis · About Operation CHARM