Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Manifold Absolute Pressure (MAP) Sensor
A scan tool displays manifold pressure in kPa and MAP sensor signal voltage. Low pressure, or high vacuum, displays a low voltage while a high pressure, or low vacuum, displays a high voltage. A failure in the MAP sensor circuit should set a DTC P0107 or P0108 and using the applicable table will lead to the cause of the problem. A DTC P0108 may be set if misfire or a rough or unstable idle exists. A DTC P0105 will set for a MAP sensor that intermittently sends a zero
voltage signal to the
PCM. Refer to Manifold Absolute Pressure
(MAP) Sensor Output Diagnosis to check the MAP sensor.
Component Tests and General Diagnostics