Installation

1. Install the control arm bushings. Refer to Lower Control Arm Bushings Replacement.





2. Install the control arm (2) to the chassis.
3. Install the control arm bolts and nuts (1,3). Do not tighten the bolts and nuts.
4. Install the coil spring. Refer to Front Coil Springs Replacement.
5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
6. Lower the vehicle. Ensure the weight of the vehicle is on the tires and wheels.

Notice: Refer to Fastener Notice in Cautions and Notices.

7. Tighten the control arm bolts and nuts. Tighten
- Tighten the control arm front bolt and nut (1) to 85 Nm (61.5 ft. lbs.).
- Tighten the control arm rear bolt and nut (3) to 127 Nm (92.0 ft. lbs.).

8. Inspect the alignment. Refer to Measuring Wheel Alignment in Alignment.