Fuel Tank Pressure Sensor: Service and Repair

FUEL TANK PRESSURE SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Drain fuel tank. Refer to Fuel Tank Draining Procedure.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the fuel tank.
5. Remove the electrical connector from the fuel tank pressure (FTP) sensor.
6. Remove the fuel tank pressure sensor (10) from the modular fuel sender.

INSTALLATION PROCEDURE




1. Install the new fuel tank pressure sensor (10) to the modular fuel sender.
2. Connect the electrical connector to the fuel tank pressure sensor.
3. Reinstall the fuel tank.