Brake Switch (Cruise Control): Adjustments

1. Remove the LH I/P lower insulator panel. Refer to Closeout/Insulator Panel Replacement - IP Lower (LH) or Closeout/Insulator Panel Replacement - IP Lower (RH) in Instrument Panel, Gauges and Warning Indicators.
2. Ensure that the cruise control release switch is fully seated to the cruise control release switch bracket.
Push the switch down toward the switch bracket; audible clicks will be heard while pushing the switch.
3. Adjust the cruise control release switch.
Grasp the clutch pedal and pull fully rearward against the pedal stop; audible clicks may be heard as the switch moves into the adjusted position.
4. Install the LH I/P lower insulator panel. Refer to Closeout/Insulator Panel Replacement - IP Lower (LH) or Closeout/Insulator Panel Replacement - IP Lower (RH) in Instrument Panel, Gauges and Warning Indicators.