Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2001 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Maintenance >> Fluids >> Fluid - M/T >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fluid - M/T: Testing and Inspection

Transmission Fluid Level Inspection (Export)
Inspection Procedure





1. Raise and suitably support the vehicle; ensure that the vehicle is level. Refer to Vehicle Lifting.
2. Clean any dirt from around the fill plug hole.
3. Disconnect the electrical connector from the transmission fluid temperature sensor.
4. Remove the transmission fluid temperature sensor from the transmission fill plug hole.
5. Check that the transmission fluid level is even with the bottom of the fill plug hole.
6. Add Dexron (R) III transmission fluid, if necessary.

Notice: Refer to Fastener Notice in Service Precautions.

7. Install the transmission fluid temperature sensor to the transmission.
^ Tighten the transmission fluid temperature sensor to 27 Nm (20 ft. lbs.).
8. Lower the vehicle.
pro multis · About Operation CHARM