PASS-Key II - Adding Keys
TOOLS REQUIREDJ 35628-A Vats/Pass Interrogator Tester
IMPORTANT: When servicing the PASS-Key II system, obtain all the vehicle ignition keys. Verify the key code values with the J 35628-A.
1. In order to copy a Pass-Key II ignition key, determine the necessary key code or resistance value.
2. Determine the master ignition key code using the J 35628-A as outlined in the following procedure:
IMPORTANT: Disconnect the tool wiring connectors.
2.1. Turn ON the J 35628-A.
2.2. Insert the key into the tool lock cylinder.
2.3. Note the measured key code of the master ignition key as displayed on the key code reader.
2.4. Obtain a key blank matching the key code.
2.5. Cut the key blank to match the original key.