Programming Features - With Driver Information Center (DIC)

ENTER PROGRAMMING
To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the RESET button on the Driver Information Center (DIC) in order to clear any IPC warning messages until you clear them all (LOW VOLTAGE, DOOR AJAR, etc.).
4. Press the OPTIONS button on the DIC.
5. The DIC displays CONFIGURE OPTIONS.

TWILIGHT ILLUMINATION
Continue with the following steps in order to personalize the twilight illumination feature:
1. The DIC displays TWILIGHT - OFF.
2. Press the RESET button to change to TWILIGHT - ON.
3. Press the OPTIONS button in order to advance to the next option.
4. If the previous choice was TWILIGHT - ON, the DIC displays DELAY TIME 1 2 _ _.
5. Press the FUEL button on the DIC in order to increase the delay time. Press the GAUGES button in order to decrease the delay time. The bars after the 2 on the display move to the right or to the left depending on your delay time choice. Each bar equals 12 seconds.
6. Press the OPTIONS button in order to advance to the next option.