Scan Tool Data Definitions

Door Ajar Switches: The scan tool displays Open/Closed. The driver and passenger door ajar switch input to the body control module (BCM), where an open door is displayed as Open.

Door Lock Motor: The scan tool displays Active/Inactive. The body control module (BCM) output to the door lock actuators, where Lock is displayed as Active.

Door Unlock Switch: The scan tool displays Active/Inactive. The driver and front passenger door lock switches input to the body control module (BCM), where a switch transition to the Unlock position is displayed as Active.

Door Unlock Motor: The scan tool displays Active/Inactive. The body control module (BCM) output to the passenger door lock actuators, where Unlock is displayed as Active.

Doors Battery Fd: The scan tool displays Active/Inactive. The state of the door lock system battery teed circuit as seen by the body control module (BCM), where a complete circuit is displayed as Active.

Doors System Gnd: The scan tool displays Active/Inactive. The state of the door lock system ground circuit as seen by the body control module (BCM), where a complete circuit is displayed as Active.

Driver Door Open Switch: The scan tool displays Open/Closed. The driver door open switch input to the body control module (BCM), where an open door is displayed as Open.

Drivers Door Unlock Motor: The scan tool displays On/Off. The body control module (BCM) output to the driver door lock actuator, where Unlock is displayed as On.

Key Cylinder Unlock: The scan tool displays On/Off. The key cylinder unlock switch input to the body control module (BCM), where a key cylinder transition to the unlock position is displayed as On.

Passenger Door Jamb Switch: The scan tool displays Open/Closed. The passenger door jamb switch input to the body control module (BCM), where an open door is displayed as Open.