P0607

DESCRIPTION
This diagnostic applies to internal microprocessor integrity conditions within the control module. This diagnostic also addresses if the control module is not programmed. The following Diagnostic Codes (DTCs) are diagnosed in this DTC table:

IMPORTANT: The DTCs listed below, are not applicable to all vehicles.
^ DTC P0601 Control Module Read Only Memory (ROM)
^ DTC P0602 Control Module Not Programmed
^ DTC P0603 Control Module Long Term Memory Reset
^ DTC P0604 Control Module Random Access Memory (RAM)
^ DTC P0605 Control Module Programming Read Only Memory (ROM)
^ DTC P0606 Control Module Internal Performance
^ DTC P0607 Control Module Performance
^ DTC P1600 Control Module Long Term Memory Reset
^ DTC P1621 Control Module Long Term Memory Performance
^ DTC P1683 Control Module Ignition Off Timer Performance

DIAGNOSTIC AIDS
For complete details on programming the ECM, refer to Service Programming System (SPS) Description.

TEST DESCRIPTION

Steps 1-7:

The numbers below refer to the step numbers on the diagnostic table.
2. A DTC P0602 indicates the Engine Control Module (ECM) is not programmed.
4. Attempt to program the ECM. If the ECM fails to program a second time, replace the ECM.