Body Control Module: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.




1. Disconnect the negative battery cable.
2. Remove the right sound insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gauges, and Warning Indicators. Service and Repair
3. Remove the Body Control Module (BCM) (2).
4. Disconnect the BCM connectors from the BCM.

INSTALLATION PROCEDURE




1. Connect the BCM connectors to the BCM.
2. Install the BCM module (2).
3. Install the right sound insulator. Refer to Closeout/Insulator Panel Replacement Right in Instrument Panel, Gauges, and warning Indicators. Service and Repair
4. Connect the negative battery cable.
5. Program the BCM. Refer to BCM Programming/RPO Configuration. Programming and Relearning