Headlamp: Service and Repair

REMOVAL PROCEDURE




1. Remove the radiator grille.
2. Disconnect the headlamp bulb and turn lamp bulb electrical connectors.
3. Remove the headlamp bulb, if necessary.
4. Twist the turn lamp bulb socket counterclockwise and remove the socket from the headlamp assembly, if necessary.
5. Remove the following components from the vehicle:
5.1. The 3 bolts (3)
5.2. The headlamp assembly (1,2)

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the headlamp assembly (1,2) to the vehicle. Secure the assembly with the 3 bolts (3).

Tighten
Tighten the headlamp assembly mounting bolts to 10 N.m (89 lb in).

2. Install the turn lamp bulb socket to the headlamp assembly (1,2) and twist the socket clockwise in order to secure, if removed.
3. Install the headlamp bulb to the headlamp assembly (1,2), if removed.
4. Connect the headlamp bulb and turn lamp bulb electrical connectors.
5. Install the radiator grille.
6. Aim the headlamps as necessary. Refer to Headlamp Aiming.