Strut Ball Stud Replacement - Lift Gate

Strut Ball Stud Replacement - Lift Gate

Removal Procedure

1. Open and support the liftgate.
2. Remove the strut. Refer to Strut Replacement - Lift Gate (Strut Replacement - Liftgate) .




3. Remove the strut ball from the lid or body by turning counterclockwise.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the strut ball to lid or body by turning clockwise into the weldnut.

Tighten the strut ball to 25 N.m (18 lb ft).

2. Install the strut. Refer to Strut Replacement - Lift Gate (Strut Replacement - Liftgate) .
3. Install the support. Close liftgate.