Tilt Head Housing - Assemble

Steering Column Tilt Head Housing - Assemble - Off Vehicle

- Tools Required
- J 23653-SIR Steering Column Lock Plate Compressor
- J 42137 Steering Column Lock Plate Compressor Adapter





1. Install the following parts onto the steering shaft assembly:
1.1. The inner race (4)
1.2. The upper bearing inner race seat (3)
1.3. The upper bearing spring (2)
1.4. Lubricate the turn signal cancel cam assembly (1)
1.5. The turn signal cancel cam assembly (1)





2. Install the shaft lock shield assembly (1) onto the steering shaft assembly.





3. Install the bearing retainer using J 23653-SIR and J 42137.
4. Install the inflatable restraint steering wheel module coil.
5. Enable the inflatable restraint steering wheel module.