A/C High Pressure Recirculation Switch Replacement

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the electrical connector from the A/C high pressure recirculation switch.
3. Remove the A/C high pressure recirculation switch from the evaporator tube.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the A/C high pressure recirculation switch.

Tighten
Tighten the switch to 6 N.m (53 lb in).

2. Connect the electrical connector to the A/C high pressure recirculation switch.
3. Lower the vehicle.