General Description

Insert a CD partway into the slot, label side up. The player will pull it in. The CD should begin playing. The display will show CD and the CD symbol. If you want to insert a CD with the ignition off, first press RECALL or EJECT.

If driving on a very rough road or if the weather is very hot, the disc may not play and ERR (error) may appear on the display. Press RECALL to take ERR off the display. When things get back to normal, the disc should play.

If the disc comes out, the following conditions may be present:
^ The CD is upside down.
^ The CD is dirty, scratched or wet.
^ The air is very humid. If so, wait about an hour and try again.

PREV (1):
Press this button or the left SEEK arrow in order to go to the previous track if the current selection has been playing for less than 8 seconds. If the PREV button is pressed and the current selection has been playing for more than 8 seconds, the CD will go to the beginning of the current selection. If you hold the button or press PRV more than once, the player will continue moving back through the CD. The sound will mute while seeking.

RDM (2):
Press this button in order to hear the tracks in random, rather than sequential, order. RANDOM will show on the display. Press RDM again in order to turn off the random play. RDM is reset to off when the CD is ejected.

NEXT (3):
Press this button or the right SEEK arrow in order to go to the next track. If you hold the button or press NEXT more than once, the player will continue moving forward through the CD. The sound will mute while seeking.

REV (4):
Press and hold this button in order to quickly reverse within a track. Release REV to play the passage. The counter reading on the display can be used to locate a passage quickly.

FWD (6):
Press and hold this button in order to advance quickly within a track. Release FWD to resume playing. The counter reading on the display can be used to locate a passage quickly.

RECALL
Press this button in order to see which track is playing. Press RECALL again within 5 seconds to see how long the track has been playing, elapsed time. The track number also appears when you change the volume or when a new track starts to play. Press RECALL a third time and the time of day will be displayed.

AM-FM:
Press this button in order to play the radio when a CD is playing. The CD will stop but remain in the player. The CD icon will disappear off the display.

CD AUX
Press this button to change to the CD function when the radio is on. A CD icon will appear on the display when a CD is in the player, whether the CD is active or not. If the system is equipped with a remote playback devise, pressing this button a second time will allow the remote devise to play.

EJECT:
Press this button in order to remove the CD or stop the CD and switch to the radio. The CD will start at the first track when you reinsert it.

If you turn off the ignition or radio with a CD in the player, the CD will stay in the player. When you turn on the ignition or system, the disc will start playing where the CD was stopped. If you press EJECT but do not remove the CD, the player will pull the CD back in to protect it after about 1 minute. If you leave a CD in the player while listening to the radio, the CD may become warm.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes