Trunk-Mounted CD Changer

With the optional CD changer, 12 CDs can be played continuously. Normal size discs may be played using the trays supplied in the magazine. The small CDs 8 cm (3.1 in) can be played only with specially designed trays.

First load the magazine with CDs before you can play a CD. Each of the 12 trays holds one CD.




Press the button on the back of the magazine and pull gently on one of the trays.




Load the trays from the bottom to the top, placing a CD on the tray label side down. If you load a CD label side up, the CD will not play and an error will occur.




Gently push the tray back into the magazine slot. Repeat this procedure for loading up to 12 CDs in the magazine.

Once the CDs are loaded in the magazine, slide open the door of the CD changer. Push the magazine into the CD changer in the direction of the arrow on top of the magazine.

Close the door by sliding the door all the way to the left. If the door is left partially open, the CD changer will not operate and an error will occur. When the door is closed, the CD changer will begin checking for CDs in the magazine. This will continue for up to 2 minutes depending on the number of CDs loaded.

To eject the magazine from the CD changer, slide the CD changer door all the way open. The magazine will automatically eject. Remember to keep the door closed when possible to keep dirt and dust from getting inside the CD changer.

Whenever a magazine with CDs is loaded in the CD changer, the CD symbol will appear on the radio display. If the CD changer is checking the magazine for CDs the CD symbol will flash on the display until the CD changer is ready to play. When a CD begins playing, a disc and track number will be displayed. The disc numbers are listed on the front of the magazine.

All of the CD functions are controlled by the radio buttons, except for ejecting the magazine.

PREV (1):
Press this button or the SEEK left arrow in order to go to the previous track if the current selection has been playing for less than 8 seconds. If the PREV button is pressed and the current selection has been playing for more than 8 seconds, the CD will go to the beginning of the current selection. If you hold or press this button more than once, the CD changer will continue moving back through the CD. The sound will mute while seeking.

PROG (2):
Press this button in order to select a CD. The CD number and track number will be displayed.

NEXT (3):
Press this button or the SEEK right arrow to go to the next track. If you hold the button or press the button more than once, the CD changer will continue moving forward through the CD. The sound will mute while seeking.

REV (4):
Press and hold this button in order to reverse quickly through a track selection. Release REV to resume playing.

FWD (6):
Press and hold this button in order to advance quickly through a track selection. Release FWD to resume playing.

SEEK
Press the right arrow to seek to the next selection on the CD. Press the left arrow to search for the previous selection on the CD. The sound will mute while seeking.

P.SCAN
Press this button in order to hear the tracks in random, rather than sequential, order. RANDOM will appear on the display. Press P.SCAN again to turn off random play.

TAPE AUX
Press this button if there is a CD loaded in the CD changer and the radio is turned on, to play a CD. Press AM-FM to return to the radio when a CD is playing. Press TAPE AUX to switch between the tape and CD if both are loaded.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes