Fog Lamp Switch Replacement - Front

REMOVAL PROCEDURE




1. Remove the instrument panel accessory trim plate.
2. Disconnect the fog lamp switch (2) electrical connector.
3. Disconnect the electrical connector from one of the following switches (1), if equipped:
^ Traction control
^ Second gear start




4. Unsnap the fog lamp switch from the instrument panel accessory trim plate.

INSTALLATION PROCEDURE




1. Install the tog lamp switch to the instrument panel accessory trim plate.
2. Connect the electrical connector to one of the following switches (1), if equipped:
^ Traction control
^ Second gear start




3. Connect the fog lamp switch (2) electrical connector.
4. Install the instrument panel accessory trim plate.