Power Door Lock Switch: Service and Repair

REMOVAL PROCEDURE




1. Using a flat-bladed tool, press down at the top of the switch (1) to release the retainer tab.
2. Lift up to release the bottom retainer tab and pivot the switch out of the door trim pad.
3. Disconnect the electrical connector (2) from the power door lock switch (1).
4. Remove the power door lock switch (1) from the door trim pad.

INSTALLATION PROCEDURE




1. Connect the electrical connector (2) to the power door lock switch (1).
2. Pivot the power door lock switch (1) back into the door trim panel.
3. Install the door lock switch pressing in until fully seated.