Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Switch: Service and Repair

Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Remove the steering column trim covers.





3. Remove the retaining screws from the multifunction switch (2).
4. Remove the multifunction switch (2) from the steering column.
5. Disconnect the electrical connectors from the multifunction switch (2).

Installation Procedure





1. Connect the electrical connectors to the multifunction switch (2).
2. Install the multifunction switch (2) to the steering column while depressing the spring loaded horn pin.

Notice: Refer to Fastener Notice in Service Precaution.

3. Install the retaining screws to the multifunction switch (2).
Tighten the screws to 4 Nm (36 inch lbs.).
4. Install the steering column trim covers.
5. Connect the negative battery cable.
6. Ensure that the multifunction switch functions properly.