Fluid Filter - A/T: Service and Repair

Oil Filter and Seal Replacement
^ Tools Required
- J 6125-1B Slide Hammer Adapter
- J 23129 Universal Seal Remover

Removal Procedure





1. Remove transaxle oil pan.
2. Remove the oil filter. Use a long screwdriver in order to pry the oil filter neck out of the seal.
3. Check the oil filter seal for damage or wear.
4. As needed, remove the seal using the J6125-1B and the J23129.

Installation Procedure





1. Install a new seal, as needed. Before installing, coat the new seal with a small amount of petroleum jelly.
2. Install a new filter into the case.
3. Install transaxle oil pan.