Reveal Molding

REMOVAL PROCEDURE
1. Remove the rear door window.
2. Remove the rear door stationary window.
3. Remove the reveal molding retaining screw.
4. Starting at the front of the door, pull the molding out of the window frame track.
5. Remove the reveal molding from the door.

INSTALLATION PROCEDURE
1. Position the reveal molding to the window frame track.
2. Starting at the rear corner, press the reveal molding into the track.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the reveal molding screw.

Tighten
Tighten the reveal molding screw to 6 N.m (53 lb in).

4. Install the stationary window.
5. Install the rear door window.