Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Exterior Moulding / Trim: Service and Repair

FILLER PANEL REPLACEMENT - TAIL LAMP

REMOVAL PROCEDURE
1. Open the rear compartment
2. Pull back the rear compartment trim panel.
3. Remove the nut from the filler panel in the rear compartment.
4. Remove the rear bumper fascia.
5. Remove the nuts from the filler panel.
6. Remove the filler panel from the rear body panel.

INSTALLATION PROCEDURE
1. Install the filler panel to the rear body panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the filler panel nuts.

Tighten
Tighten the filler panel nuts to 6 N.m (53 lb in).

3. Install the rear bumper fascia.
4. Install the nut to the filler panel in the rear compartment.
5. Push back the rear compartment trim panel into place.
6. Close the rear compartment.