Lock Striker Replacement - Rear Compartment Lid

Lock Striker Replacement - Rear Compartment Lid

Removal Procedure




1. Mark the location of the striker as an aid in installation.
2. Remove the bolts attaching the striker to the lid.
3. Remove the striker.

Installation Procedure




1. Position the striker to the lid with the arrow pointed down.
2. Install the left side bolt first. (net locating hole).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the right side bolt.

Tighten the rear compartment lid latch striker bolts to 10 N.m (89 lb in).