Console Compartment Door - Hinge Replacement

Console Compartment Door Hinge Replacement

Removal Procedure




1. Remove the console from the vehicle.
2. Open the console door.
3. Remove the screws retaining the console door to the door hinge.
4. Remove the console door.




5. Remove the nuts retaining the hinge to the console.
6. Remove the hinge from the console.

Installation Procedure




1. Position the console door hinge to the console.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the nuts retaining the door hinge to the console.

Tighten the console door hinge retaining nuts to 2.4 N.m (21 lb in).




3. Position the console door to the door hinge.
Insert both door alignment pins into the hinge alignment holes.
4. Install the screws retaining the console door to the door hinge.

Tighten the console door retaining screws to 1.9 N.m (17 lb in).

5. Install the console to the vehicle.